Boat Accessories & Deck Hardware

Viking Rollers supplies boat accessories and deck hardware to trailer builders, marine dealers, chandlers and service and repair shops across the country. Australian owned, Brisbane based and backed by 30 years of trade and wholesale experience, the range covers everyday consumables through to complete assemblies, with Australia-wide dispatch on trade and wholesale orders.

The bung range runs from tapered rubber bungs (93553–93560, numbered No. 3 to No. 10 to suit 11–25mm drain holes) through to threaded nylon and white bungs in 3/4" coarse and fine threads, and the 34mm cut-off large bung system — available as complete assemblies or as replacement bungs, bases and washers. For trailering, the 92190-series outboard motor support brackets are backed by replacement inner sections in 400mm and 730mm lengths (92198/92199), an outer with bolt and rubber (92200), 185mm rubber noses, and bolt-on or clamp-on galvanised flags to suit 2" x 1", 2" x 2" and 3" x 2" trailer frames.

Rounding out the category: galvanised rowlocks in ring and open styles, oar stops and tips, rubber straps with stainless S-hooks from 10" to 31", black trim rings and slop stoppers, mooring springers, a 350mm three-spoke alloy steering wheel, safety V-sheets and Queensland regulation 8" boat letters. Send through your part numbers and quantities and we’ll come back with a quote — trade and wholesale enquiries welcome.

Frequently asked questions

What sizes of boat bungs do you supply?
Tapered rubber bungs come in numbered sizes No. 3 through No. 10 (parts 93553–93560), covering drain holes from 11mm up to 25mm. Threaded options include nylon and white bungs in 3/4" coarse and 3/4" fine threads, 32mm large white bungs, and the 34mm cut-off large bung system in white or black — each available as a complete assembly (bung and base) or as the screw-in bung only, with replacement bases and washers also available in the nylon range.

Can I get replacement parts for the motor support bracket, or only the complete unit?
Both. The complete bracket (inner and outer) is available in standard (92190) and long (92191) lengths, and every section is available separately: the standard 400mm inner (92198), the long 730mm inner (92199), the outer with bolt and rubber (92200) and the 185mm replacement rubber nose (92193). Galvanised support flags are also stocked in bolt-on (92195) and clamp-on styles to suit 2" x 1", 2" x 2" and 3" x 2" trailer frames.

How do I order Queensland regulation boat registration letters?
The 8" boat letters are sized to Queensland regulation and supplied in pairs under part number 90008 B, with the letter required specified at ordering. Available letters are C, D, E, K, L, M, N, P, Q, S, T, U, W, Y and Z.

How do I get pricing on boat accessories and deck hardware?
We work on a request-a-quote basis for trade, wholesale and end-user buyers alike. Send through the part numbers and quantities you need — dealers and workshops usually quote the catalogue part number (for example 93553 for a No. 3 rubber bung or 92190 for a standard motor support bracket) — and our Brisbane-based team will come back with a quote, with dispatch Australia-wide.